fbpx
How to View Partially Hidden Buttons and Fields

How to View Partially Hidden Buttons and Fields

Introduction (Please Read):
This document will provide you with the steps needed to adjust your Windows Default Font settings in order to fully view and buttons or fields that might be hidden. The Windows Default Font can change the way that fields appear within programs so adjusting this will enable you to change how the screen is displayed.
Calendar
Steps:
Step 1: Right-click on a blank area of your Windows Desktop (not on an icon) and select Properties from the context menu that appears.

Step 2: In the Display Properties screen, click on the tab that says Settings.

Step 3: Click on the Advanced button.

Step 4: On the General Tab, look at the DPI Setting drop-down. By default, Windows is set to Normal Size, which uses 96 pixels per inch to draw themselves. To enable all the buttons and fields to display properly, you need to decrease the current setting size. If it is currently set at Normal Size, click the drop-down and choose the Custom Settings option. On the subsequent screen you can adjust the percetage as necessary in order for the additional fields and/or buttons to display. You may have to restart Windows for the change to take effect.

How to View Both Contact and Property Sections Simultaneously

How to View Both Contact and Property Sections Simultaneously

Introduction (Please Read): The purpose of this document is to show how to view both a contact record and property record, and a the Today section if desired, simultaneously. Minimize Steps: Step 1: On either the contact or property section of the database, click the internal Restore Window button up near the top right of the screen (note this is not the Restore Window button for the entire program). Property Button Step 2: Click on the button for the other section you wish to view. You will then be able to view both the contact and property section (and Today section if desired) simultaneously. This will more advantageous with a larger monitor.
How to Adjust your Screen Size Settings in Realhound

How to Adjust your Screen Size Settings in Realhound

Introduction (Please Read) This document will help you to set your program to adjust the size of the program screen to fit to your monitor. Realhound was written based on the screen resolution of 1024×768, most current screens have this resolution available but as the growing trend has been toward the manufacturing of widescreen monitors this resolution setting will not use the entire screen. This documentation will walk you through how to make the Realhound screen fit more appropriately to your larger monitor. Step 1: Go to the top menu File and select User Interface Step 2: On the User interface screen there are two options that deal specifically with your display options. 9 (1) Multiple Monitor Mode – This is a mode where you will have more than one monitor setup. This feature gives you the ability to stretch the base Realhound screen across two monitors. This would enable you to open the contacts window and the properties window at the same time so that both are visible. Auto-size screens – This is for those users that just want that blank space at the lower half of the screen and to the right of the screen to be mostly eliminated. This stretches the Inner Realhound windows to fit your screen more effectively. However this does not come without some drawbacks. As the program is stretching the inner screens it is also stretching sub screens as well. Look at your Contact screen as it is stretched so will the Related Contacts area. Sometimes this stretch makes viewing the information impossible due to the resolution of your monitor. If you are experiencing certain areas where you cannot see all the data because it is now larger and you cannot scroll to see the information. Then you should consider keeping the Auto-sizing screens turned off and deal with the blank spaces on the screen.